Sydney appliance services
Cooktop services in Sydney
Yes — we repair, install, and replace cooktops across Sydney: gas, electric, ceramic, and induction. Every gas job is done under NSW gas-fitting licence with a certificate of compliance.
Repair, installation, and replacement of gas, electric, ceramic, and induction cooktops. NSW gas-fitting compliance on every gas job.
What we do for your cooktop
2 services available
Cooktop repairs
Repair gas, electric, ceramic, and induction cooktops across Sydney. Ignition, elements, induction coils, glass surfaces, and controls. Quoted first.
Cooktop installation & replacement
Install and replace gas, electric, ceramic, and induction cooktops across Sydney. Licensed gas fitting, circuit checks, certificate of compliance on every job.
Common cooktop faults we see
- Gas burner won’t ignite, clicks continuously, or burns yellow and lazy
- Ceramic or electric zone dead while the others work
- Induction error codes, coils, and zones cutting out mid-cook
- Cracked glass surfaces and failed touch controls
Brands and coverage
Miele, Bosch, Smeg, Westinghouse, Electrolux, ILVE, Fisher & Paykel and most major brands.
We cover Sydney CBD, Eastern Suburbs, Inner West, North Shore, and Sutherland Shire. Full detail on the coverage page. The full brand list is on the brands page. Every job is quoted before work starts.
Repair or replace a cooktop?
With cooktops the surface decides most of it. Glass and ceramic damage is not repairable, while almost everything behind the surface is. These are the factors we weigh.
| Repair usually makes sense when | Replacement is usually the better call when |
|---|---|
| One burner or zone has failed while the others still work. | The ceramic or glass surface is cracked, which is not repairable and is a safety issue. |
| A gas burner will not ignite, clicks continuously, or burns with a yellow flame. | The frame or burner tray has corroded through. |
| The fault is in the ignition module, gas valve, or control, not the cooking surface. | The induction generator board is discontinued for the model. |
| An induction zone cuts out but the glass and frame are undamaged. | You are converting between fuel types, which changes the appliance and the connection. |
Diagnosed on the visit, so you get the position on your own cooktop rather than a guess over the phone.
Cooktop questions
Frequently asked questions
-
Can you repair a cracked ceramic or induction cooktop?
No. A cracked glass surface cannot be safely repaired and the cooktop needs replacing. We can quote the replacement and the installation together. -
My gas burner clicks but will not light. Can that be fixed?
Usually, yes. Continuous clicking normally points at the ignition module, a fouled electrode, or a burner cap seated incorrectly. All three are repairable. -
Do you convert gas cooktops to induction?
We install induction cooktops. Moving from gas to induction changes both the gas and the electrical work, so we assess the existing connections before quoting — our guide on switching to induction covers what is involved. -
Is a certificate of compliance included?
Yes. Gas work is certified under NSW gas-fitting licence, and electrical connections are certified the same way, on every job.
Ready when you are
Book a cooktop service
Send the details. We get back during business hours, Monday to Friday.
- Phone
- (02) 9669 4933
- Coverage
- Sydney CBD · Eastern Suburbs · Inner West · North Shore · Sutherland Shire